Waste Oil Refinery Plant
|
Index |
Unit |
K2 |
K5 |
K10 |
K20 |
|
Capacity |
Ton / day (24 hours) |
2 |
5 |
10 |
20 |
|
Recovery ratio |
% |
Above 85% |
|||
|
Working pressure |
MPa |
≤ 0.4 |
|||
|
Working vacuum |
MPa |
-0.08 ~ -0.0998 |
|||
|
Working Temperature |
℃ |
80-350 |
|||
|
Working Noise |
dB (A) |
75 |
|||
|
Power supply |
V |
380v, 50hz, 3Phase (option) |
|||
|
Heating way |
|
Electric-Heater or boiler ( fuel, natural gas or coal) |
Boiler (Fuel, natural gas or coal) |
||
|
Pump Motor Power |
kW |
15 |
25 |
45 |
60 |
|
Working Size |
㎡ |
200 |
300 |
500 |
700 |
Recovery rate:
|
Final products |
Ratio Percentages |
Distillation temperature |
Vacuum Value |
|
Water |
2% |
80-110 |
-0.098 |
|
Gasoline and diesel |
8% |
120-210 |
500Pa |
|
Light base oil |
40% |
220℃-290℃ |
300Pa |
|
Heavy base oil (Viscosity ≥SN150 ) |
45% |
300℃-350℃ |
200Pa |
|
Oil Residual |
5% |
|
|
|
Total |
100% |
|
|
Application:
Waste oil usually collected from machinery, vehicles, ships etc. which color is black and very dirty. Because the waste oil contains too much contamination, including non-hydrocarbon, alkene, polycyclic aromatic hydrocarbon, metal hydronium, impurities, metal particles, asphaltene and colloid etc. thereby it is harmful for the lubricating system and car engine etc, waste oil lost it’s control friction which have to be replaced.
Transitional way to recycling the waste oil is by acid way, which will produces much waste sludge, bad smell, non-friendly environment, and the produced base oil is not purity, and it is easily oxidized. Many countries forbid the acid way.