PRODUCTS
Causes of heating of vacuum oil filter
Reasons for the vacuum oil filter to heat up: There are many reasons for the vacuum oil filter to heat up. Possible reasons:
1. The machine is not operating normally: During the working process of the vacuum oil filter, if the machine is not operating normally, such as machine vibration, excessive noise, etc., it will cause the machine to heat up.
2. Oil temperature is too high: Oil temperature is too high is also one of the reasons causing the vacuum oil filter to heat up. When the oil temperature is too high, not only will the machine generate heat, but it will also have a negative impact on the quality of the oil.
3. Parts wear: If the vacuum oil filter is used for a long time, parts will inevitably wear out, which will also cause the machine to heat up.
Vacuum oil filter heating treatment method:
1. Ensure that the machine is operating normally: check whether there are any abnormalities when the machine is working, clean the filter plate and oil pump in time.
2. Control oil temperature: The oil temperature can be controlled by increasing the number of water coolers or increasing the radiator area to reduce heat generation.
3. Replace worn parts: When the machine finds that parts are seriously worn, they need to be replaced in time to reduce the friction heat and heating of the machine.
1. The machine is not operating normally: During the working process of the vacuum oil filter, if the machine is not operating normally, such as machine vibration, excessive noise, etc., it will cause the machine to heat up.
2. Oil temperature is too high: Oil temperature is too high is also one of the reasons causing the vacuum oil filter to heat up. When the oil temperature is too high, not only will the machine generate heat, but it will also have a negative impact on the quality of the oil.
3. Parts wear: If the vacuum oil filter is used for a long time, parts will inevitably wear out, which will also cause the machine to heat up.
Vacuum oil filter heating treatment method:
1. Ensure that the machine is operating normally: check whether there are any abnormalities when the machine is working, clean the filter plate and oil pump in time.
2. Control oil temperature: The oil temperature can be controlled by increasing the number of water coolers or increasing the radiator area to reduce heat generation.
3. Replace worn parts: When the machine finds that parts are seriously worn, they need to be replaced in time to reduce the friction heat and heating of the machine.